Darkwing Duck Gas Gun Toy

Came across another awesome thing I would like to 3D print.  It is a toy Darkwing Duck gas gun.  Can remember seeing this show a few times as a kid.  You can give it a look > here over at Printables.com.   It comes in 18 parts.  Once done printing you glue together.  Own have black PLA so if I do get around to printing this will just paint the parts after.

Slurm Can 3D Model Update

It has been many months since I did any painting of the 3D models I have been working on.  Back in November (2022) talked about the Slurm can that came with the 3D model Fry from Futurama > here over at Printables.com.  Had upscaled the can, printed the parts, glued them together and then primed it.  Since then it has sat on the shelve untouched.  Well until a few days ago started painting again.  Am hoping to have it done by the end of the week.

Court of Owls Mask

A few posts backed talked out printing a Court of Owls Mask found > here over at Printables.com.   Well I got around to doing that.  Scaled it down to 40%.  Didn’t want a full size mask.  All so it would have taken way too long to print, well over a day.  Before printing it.  Played around with the best way to support.  In the end tilted to 35 degrees and added three supports.  Am happy with how it turned out.  May be at some point will make a full size version.

Court Of Owls Mask

Am read in of the DC Comics Novels, Batman: The Court of Owls.   Am liking it a lot.  Got thinking about if there are an 3D files out there.  Found this > here over at Printables.com.  It is a Court of Owls Mask.  There are three version.  Not sure which one I like the most.  Think what I am going to do is downsize one of them and see what is the best way to print it.   Like do I lay it flat and and lot of supports.  Or do I keep it upright with a few supports.

Articulated Minecraft Creeper: Print-In-Place

Have printed off another thing found over at Printables.com.  This > here, Articulated Minecraft Creeper: Print-In-Place.  Wanted to see if my 3D printer settings could do something like this.  Happy to say it turned out great.  Once done you can take a small knife to separate the legs.  Then just turn the head very carefully to unlock it.

PlayStation 5 Controller Stand Remix Again

It was back on February 5, 2023 that I uploaded my remix of a PS5 controller stand over at Printables.com.  Less than a month later it has been downloaded over 60 times.   Think that is super cool people like it enough to download and many be print out.  This got me thinking many be I should try my hand at making my own files or remix some more.  You can the remix I did > here.

Kuchi Kopi (Good & Bad)

You might know I am a big fan of Bob’s Burgers.  Years ago looked for some 3D files to print.  Did find a cool one but it was a paid file.  Which is fine but never got it.  Well looked the other day over at Printables.com and seen this > here, Kuchi Kopi (Good & Bad).  I download it right way.  Then started to print the bad one the next day.  It’s super cool.  So when the weather gets better, going to paint it.

Ned Stark’s Sword Ice from Game of Thrones Bookmark

Have been watching the first season of House of the Dragon.  Got looking over at Printables.com for any models from this show or Game of Thrones.  Came across this > here, Ned Stark’s Sword Ice Bookmark.  It’s a simple and quick print.  So decided to give it a try.  Upscaled it first and turned on the Ironing feature.  This took about two hours to print.  However there was a problem.  It lifted from the build plate in spots.  So going to give it another try.

PlayStation 5 Controller Stand Remix

A few posts back talked about 3D printing a  controller stand for my PS5.  Found this > here over at Printables.com.  All so in that post talked about how I added the PlayStation logo to the front of it.  Well decided to upload that STL file to Printables.  A lot of the files on there let you remix them and upload. As long as you say who the original designer is.  That’s very simple to do.  You can give my remix a download > here.

PlayStation 5 Controller Stand

Now that I own a PlayStation 5 wanted to 3D print a controller stand.   Have one for my PS4 controller.  Looked over on Printables.com and seen this one > here.  It’s a simple print that doesn’t need supports.  However the front is a bit plain with nothing on it.  Decided to see if I could get the PlayStation logo on there.  Google the logo and did a quick photo edit.  Took that picture and turned that into a SVG file.  Download that STL file and then imported them both in Tinkercad.  Messed around with that for a bit and came up with this, (Picture below).  Am very happy with how this turned out.