Archive for Filament.ca

EconoFil™ Standard PLA Filament Arrived

Posted in Uncategorized with tags , , , , , , , , , , , , , , , , , , , , , , , , on July 24, 2022 by getbent57

The EconFil standard PLA in black > here from Filaments.ca arrived in the mail on (July 18, 2022.)  Took about a week to get here.  Which is not too bad but it still cost me $22.00 in shipping.  Back in November (2021) the cheap shipping was $17.00.  Not sure how quickly I will be getting to use this PLA since I just open the last roll of the other PLA I had.  Just hope this stuff is just as good or better.

EconoFil™ Standard PLA Filament

Posted in Just something to say with tags , , , , , , , , , , , , , , , , , , , , , , , , on July 12, 2022 by getbent57

EconoFil_Standard_PLA_FilamentHave decided on the next PLA filament from, Filaments.ca I am going to buy.  it is EconFil standard PLA in black > here.  Went though all the PLA they offer and this one had the best price point.   All so this past weekend (July 9, 2022) they were running a 20% off sale with a coupon code they emailed.  So ordered two rolls.

[Update]  It has been shipped.  My guess it might be here by the end of the week.

PLA Filament

Posted in Just something to say with tags , , , , , , , , , , , , , , , , , , on July 6, 2022 by getbent57

It was back in October (2021) that I ordered some PLA filament from, Filaments.ca.  Bought two rolls of this one > here.   A few days ago the first roll ran out so opened the second up.  Want to order more to have on hand.   Have been happy with it but sadly this one is still out of stock.  So looking at some other brands from the same website.  For course they those other rolls are more money.  Will be back with an update once I decided on which one to get.

Low Poly Teenage Mutant Ninja Turtles Update

Posted in Just something to say with tags , , , , , , , , , , , , , , , , , , , , , , , , on January 9, 2022 by getbent57

Back in November (2021) 3D printed some low poly Teenage Mutant Ninja Turtles, these files > here.   Scaled them up 300% and the turned out awesome.  Want to paint them put the weather had turned a bit too cold to prime.  Well the other day (January 6, 2022) the temperature it about 8c so decided to give them a priming any way.  Left them on the shed over night because of the smell.  The next day brag them inside to see if they would dry.  It seemed to have worked.  Now I can start to paint them.  Will be back with more updates along the way.

Low Poly Teenage Mutant Ninja Turtles

Posted in Just something to say with tags , , , , , , , , , , , , , , , , , , , , , , , on November 23, 2021 by getbent57

Low_Poly_Ninja_TurtlesHad lots of fun printing and painting the Low Poly Hulk model.  Decided to see what other cool low poly models are out there.  When is seen someone made Teenage Mutant Ninja Turtles. I just had to do that next.  Printed Leo off first at the size the STL file was.  It was pretty small. So, scaled it up 300%, that will make it much better to paint and display.  After printed the other three turtles.  They all took bit over five hours to print.  Wanted to prime them but it is November now.  Meaning the weather is not so great.  If not, am not sure how will paint will stick to the PLA.  Might have to test that out.  As for the models you can download them yourself > here.

Low Poly Hulk Done

Posted in Just something to say with tags , , , , , , , , , , , , , , , , , , , , , , , , , , , on November 21, 2021 by getbent57

Made a few posts all ready talking about the Low Poly Hulk model form youmagine.com > here.   3D printed it in black PLA.  The prime it in grey.  After that painted it.  It took three coats of green.  Two for the purple and just one for the black.  After I finished painting it.  Had to do a few touch ups with my hand wobbled.  As you can see the picture below.  I think it turned out great.  My next step is to seal it in a clear coat.  The only problem is, its November so the weather can be hit or miss.

 

Low Poly Hulk

Posted in Just something to say with tags , , , , , , , , , , , , , , , , , , , , , , , , on November 15, 2021 by getbent57

A few posts back talked about 3D printing a Low Poly Hulk model that I got from youmagine.com > here.   It took over 19 hours to print and it turned out amazing.  Decided that I will paint.  With only three colours it should be an easy job.  Picked up some green and purple paint.  All ready have some black.  So far as I am typing this (November 12, 2021, have two coats of green on.  Thinking one more should do it.  Then I will move on to the purple pants.  Will post a picture or two when it is done.

PLA Filament From Filaments.ca

Posted in Just something to say, Pictures with tags , , , , , , , , , , , , , , , , , , , , , , , on November 10, 2021 by getbent57

Took me about a month but got around to trying the PLA filament I ordered from Filaments.ca.  Found a cool low poly Hulk model over at youmagine.com > here.  It seemed easy to print and simple to paint.  Which I will do at some point.  Scaled the model down at first just to see who well it would turn out.   In which it did.  So, printed it again, just much bigger.  It took about 19 hours and 25 mins.  It looks amazing.  As for the PLA filament it is this one here.  (Sadly, sold out as of typing this November 7, 2021).

Filaments Has Arrived

Posted in Just something to say with tags , , , , , , , , , , , , , , , , , , , , , on October 13, 2021 by getbent57

Had a happy surprise this past Saturday (October 9, 2021) the PLA Filament I ordered from Filaments.ca arrived.  When I first ordered it, which was a Monday, of that week.  It was estimated to show up at my door on Friday.  When that came and went got thinking it will be some time next week.  This was all Thanksgiving weekend as well.  Thinking that might push it back more.  Well when I came home from work on Saturday it was sitting on the step.  I came nicely packaged.  They even put in two re-sealable bags with salt packs. When I am on vacation plan to test this stuff out.

Filaments.ca

Posted in Just something to say with tags , , , , , , , , , , , , , , , , , , , , on October 9, 2021 by getbent57

Filaments_caA few post back talked about ordering some PLA filament.  Right after uploading, went on Filaments.ca and ordered two rolls of basic PLA in black.  This one > here.  At the time of typing this (October 7, 2021) it is on sale for $17.95.  Which seems to be a really good deal.  They do have free shipping if you spend over $125.  Wasn’t going to do that so I had to pay for shipping.  That being said it was cheaper to go though them than to buy two rolls of Amazon.ca.   Should have it my hands some time next week.  Will be back with an update post.