3D Printed Coin

In this weeks video for the YouTube Channel, I’d Rather Watch Paint Dry.  A little while back made a video with the goal to design a coin to be used as a promo item for this YouTube channel. I made the coin in Tinkercad. It didn’t turn out so good. So went back to the drawing board and tried again. Had much better results.  You can see for yourself > here or below.

Please like, subscribe, follow and comment.

Check the merch here > IRWPD’s Redbubble Store

Finds us on Facebook > here

Find us on Twitter > here

3D Modeled Coin

Awhile back I made a 3D model of a coin using Tinkercad and printed on my Elegoo Mars.  Printed off about seven of them at one time.  They didn’t turn out so good.  So decided to start over.  The first time I use the dimensions of Toonie.  This time I just made a bigger coin thinking it will be cooler to look at and hold.  Making them as kind of like a promo for the YouTube channel I’d Rather Watch Paint Dry.  In the picture below.  The small coin in the front is the old model and the one in the back is the new.  I have printed off six off the new.  Just need to clean and cure them.  Will be back with another post.

Elegoo Mars Prints

In this weeks video for the YouTube Channel, I’d Rather Watch Paint Dry,  talk about using my Elegoo Mars 3D printer.  Jumped back into using it.  My goal was to design a coin to be used a promo item for this YouTube channel. I made the coin in Tinkercad.  Let’s see how it turns out. You can see the video > here or below.

Please like, subscribe, follow and comment.

Check the merch here > IRWPD’s Redbubble Store

Finds us on Facebook > here

Find us on Twitter > here

ELEGOO Mercury and Mercury Plus

If you have stopped by this blog over the past year you will know that I have and Elegoo Mars 3D printer.  All so I did order an Anycubic Washing & Curing Machine.  But ever got it because they stopped sending them to Canada.  You can get one of Amazon.ca but they want too much money.  For awhile Elegoo have been teasing that the would be putting you their own resin curing machine.  That is out now and is called the Elegoo Mercury.  Which is not a bad price over at Amazon (as I am typing this July 5, 2020) $80.00.  However there is another options out there, some what.  It is called the Elegoo Mercury Plus.  It is their version of the Anycubic machine.  However there is not much to go on yet.  Have seen some pictures and some saying they have one.  Am eyeballing the Mercury but if there is a washing and curing machine on it’s way, just might wait it out.

Elegoo Mars Prints

Have gotten back to using my 3D printer an Elegoo Mars.  Months ago gave Tinkercad a try and came up with a simple coin design.  This is what I printed.  Well seven of them.  Once I the model how it need to be on the build plate it cloned it over six more times.  When I design it use the dimensions of a toonie.  Thinking it would keep the same size.  However after the print stop seen that they were much smaller.  So going to give it another try and up the size scale a bit.

Anycubic Washing & Curing Machine One Last Update

Finally heard back about the Anycubic Washing & Curing Machine I ordered back in March (2020).  They said it will not be shipped since it will no longer be a Canadian supplier.  When I first looked at getting this I did check to see if they are or ship to Canada.  At that time they did.  Then they asked if I wanted a refund.  Well of course I do.  Not going to give you my money for free.  Need to keep a close eye on my Pay Pal to make sure they do.  Still every much would like to get on of these machines.  They only place in Canada is to get one now is Amazon.ca.  Which is fine but they want too much.  All more $100.00 than I paid the first time.  If they do go on sale at some point it jump at it.

[Update] Since typing this post have received a refund.

Anycubic Washing & Curing Machine Another Update

Still waiting to see when I will receive the Anycubic Washing & Curing Machine I bought back in March (2020).  A little bit back story. Ordered it and at that time it was for sale and at a good price.   Went though buying it with Pay Pal.  Received and email saying you order has been received.  Will update you went it ships.  As I did that the product listing went back to be a pre-order.  Since then It now for sale again.  Every day I check my email for original link they sent me to see if they are shipping it.  Still haven’t received any notices.  So I sent them an email asking questions.   A week and a half later, still no reply.  Going to email again.  I know the world is a bit crazy now but an simple email would be nice.

Anycubic Washing & Curing Machine Update

It was back in March (2020) that I ordered the Anycubic Washing & Curing Machine.  At that time it was for sale and at a good price.   Went though buying it with Pay Pal.  Received and email saying you order has been received.  Will update you went it ships.  A few weeks go by and still haven’t got any news on shipping.  Head back to their website.  The product listing reads it back to pre-ordering.  So my guess I just missed out on the first batch.  It is now April 11, 2020 (As I am typing this).  The website says it is now sold out.  Do hope I get some kind of info on it soon.  If not just might have to see if I can get my money back.

Anycubic Washing & Curing Machine Ordered

A few weeks back talked about the Anycubic Washing & Curing Machine.   This device let your clean and curing you resin 3D prints.   I own an Elegoo Mars.  Before it was out you could have pre-ordered and saved a bunch of money if you bought it from their website.  The thing was, it was in US money.  I decided to see it would come to Amazon.ca.  It did, and at first they had a $80 digital coupon.  Dragged my feet on that and missed out.  So on Amazon.ca it cost $360.00 now.  That is a bit too much for me.  So looked back on the Anycubic website and they are asking $189.00 US.  Did some math and it is cheaper to buy it in US money and do the money exchange.  I even found a discount code, so I saved an extra $10.00.  It ended up costing me $260.00 in Canadian with free shipping.   A much better deal.  Not sure when it will get here. Guessing about a week.  Will be back with an update.

Anycubic Washing & Curing Machine

Back in January (2020) found out that Prusa has a washing and curing machine called the CW1.  It as pretty slick machine for being used with resin 3D prints.  The thing is, it costs $700.00 US.  Discovered there is another machine coming out soon called the Anycubic Washing & Curing Machine.  Anycubic make many different 3D printers and have one that is comparable to the one I have the Elegoo Mars.  Watched a video on how it works.  Which you can see > here.  Must say it works great and think its prefect of me.  But was guessing it would be super pricey.  Turns out it a great price, $189.00 US.  However as of typing this (February 25, 2020) its $159.00 US in a pre-order.  For that price very temped.

[Update]  You can know buy it.  It is even on Amazon.ca. Even more temped to buy one.