MatterControl – 3D Printing Software

Has been a long while since I have done anything with my 3D printer or try to design something to print.  Since it’s a new year decided to try to get back into it.  Have messed around a bit with Tinkercad.   It is a great web based program for 3D modeling.   Have discovered a similar but more powerful program called MatterControl.  Have heard of it awhile back but only thought it was only for sliceing models.  Turns out it can do a lot more than that. You can design and edit with it as well.  The best part is it free..  So going to give it a try.  My main goal is to make some RGB lit letters to be used in the background for I’d Rather Watch Paint Dry YouTube channel.

3D Printed Coin

In this weeks video for the YouTube Channel, I’d Rather Watch Paint Dry.  A little while back made a video with the goal to design a coin to be used as a promo item for this YouTube channel. I made the coin in Tinkercad. It didn’t turn out so good. So went back to the drawing board and tried again. Had much better results.  You can see for yourself > here or below.

Please like, subscribe, follow and comment.

Check the merch here > IRWPD’s Redbubble Store

Finds us on Facebook > here

Find us on Twitter > here

ELEGOO Mini Air Purifier

If you have stopped by this blog with the last year you might now that I have a Elegoo Mars 3D printer.  This uses resin.  Which has a strong smell to it.  Am sure it can’t be really good for you to breath in.  A little while back seen a device that they put out called the Elegoo Mini Air Purifier.  This are two little battery power carbon filters.  They sit next to the resin vat and you put the cover over them.  At that time didn’t buy it because I wanted to look up more about them.  Didn’t find much.  When back to buy then any way and they were out of stock.  Fast forward to early September (2020) and seen that Amazon.ca had then back in stock > here so order one.  (They are out of stock again as I am typing this September 13, 2020).  Have yet to try them out.  Do hope they work good.  If they do will be able to print more in the winter with out having to open up windows.

3D Modeled Coin

Awhile back I made a 3D model of a coin using Tinkercad and printed on my Elegoo Mars.  Printed off about seven of them at one time.  They didn’t turn out so good.  So decided to start over.  The first time I use the dimensions of Toonie.  This time I just made a bigger coin thinking it will be cooler to look at and hold.  Making them as kind of like a promo for the YouTube channel I’d Rather Watch Paint Dry.  In the picture below.  The small coin in the front is the old model and the one in the back is the new.  I have printed off six off the new.  Just need to clean and cure them.  Will be back with another post.

Elegoo Mars Prints

In this weeks video for the YouTube Channel, I’d Rather Watch Paint Dry,  talk about using my Elegoo Mars 3D printer.  Jumped back into using it.  My goal was to design a coin to be used a promo item for this YouTube channel. I made the coin in Tinkercad.  Let’s see how it turns out. You can see the video > here or below.

Please like, subscribe, follow and comment.

Check the merch here > IRWPD’s Redbubble Store

Finds us on Facebook > here

Find us on Twitter > here

PrusaSlicer

As you may know I have Elegoo Mars 3D printer.  Now that I have an Elegoo Mercury and an ultrasonic cleaner have jumped back into printing things.  When I first got the printer my brother wanted a 3D model of a shotgun shell upsized.  Found one online so that is what I wanted to print.  The auto supports in ChiTuBox are not so great.  So decided to try my hand at doing it manually.  Once that was done ran it though the program Photon Validator.  This finds un-supported islands so you can fix them in ChiTuBox.  Did that and is it seems fined.  Started to print it.  When I check on it about 35% done, this is about the spot you can see the built plate.  Seen that the shell was not stuck to the plate.  It had failed.

On a Facebook group for awhile now have been reading that people have been using PrusaSlicer to add auto supports and then do the slicing in ChiTuBox.  This Slicer is made to be used of the Prusa printers but you can set it up to be used with their resin printer.  That is what you use to add the supports.  Watched some video on how to and it is easy enough to setup.  Gave it a go.  As I am typing this the file is stuck to the build plate and looking good.  Thinking I will keep using these three programs to make 3D printing so much easier.  Will be back with an update once the shell is done.

Elegoo Mercury

Didn’t take long for my Elegoo Mercury to show up in the mail in about a week.  Bought this to go along with my Elegoo Mars 3D printer.  This resin curing station will work a lot better than the tin foil lined box I made with a light on top.  I haven’t tired it out yet waiting for my ultrasonic cleaner to show up.  Ordered them at the some time but that is coming from BC.  Should be here next week.  Will be back with another post once I give it a try.

ELEGOO Mercury

About a week ago talk about the Elegoo Mercury.  This is a resin curing station to go along with the Elegoo Mars 3D printer or any small formant resin printer.  Well I have ordered one.  For a bit there they were not in stock.  As soon as they were I ordered it.  Will take about a week to get here.  Have all so ordered an ultrasonic cleaner.  These will help me out lots with clean an curing the prints.  Want to get more into this other than the odd thing printed every now and again.  Will be back with another post with pictures when they show up.

ELEGOO Mercury and Mercury Plus

If you have stopped by this blog over the past year you will know that I have and Elegoo Mars 3D printer.  All so I did order an Anycubic Washing & Curing Machine.  But ever got it because they stopped sending them to Canada.  You can get one of Amazon.ca but they want too much money.  For awhile Elegoo have been teasing that the would be putting you their own resin curing machine.  That is out now and is called the Elegoo Mercury.  Which is not a bad price over at Amazon (as I am typing this July 5, 2020) $80.00.  However there is another options out there, some what.  It is called the Elegoo Mercury Plus.  It is their version of the Anycubic machine.  However there is not much to go on yet.  Have seen some pictures and some saying they have one.  Am eyeballing the Mercury but if there is a washing and curing machine on it’s way, just might wait it out.

Elegoo Mars Prints

Have gotten back to using my 3D printer an Elegoo Mars.  Months ago gave Tinkercad a try and came up with a simple coin design.  This is what I printed.  Well seven of them.  Once I the model how it need to be on the build plate it cloned it over six more times.  When I design it use the dimensions of a toonie.  Thinking it would keep the same size.  However after the print stop seen that they were much smaller.  So going to give it another try and up the size scale a bit.